Tutorial diffusore Air Log 6

How to set up the speaker Air Log 6?

Here is a brief summary of the steps in this tutorial for setting up your dell speaker’Air Log 6:

(1) Some warnings before the speaker tutorial Air Log 6

Before starting with the guide of the’ dispenser Air Log 6 it is important to give some warnings on the use of the device:

PROHIBITED ACTIONS

  • Do not install the device on surfaces or walls that cannot bear its weight, to avoid the risk of falling.
  • Never connect the speaker with an unsafe plug or power supply. Use only the transformer supplied
  • Keep out of reach of children.
  • Do not tilt the device.
  • Do not pour water or corrosive liquid or hazardous solvents on the surface, inside or near the device
  • Keep the device away from heat sources and flames.
  • Do not use flammable devices, explosives, corrosives and other hazardous solvents in the vicinity of or on the device
  • Do not use the device in humid or high temperature environments
  • To avoid possible problems with the functioning of the system and alteration of the self-cleaning system, do not introduce other substances.

ACTIONS REQUIRED

  • Make sure the diffuser is stable after installation.
  • Install the device in a well-ventilated and suitable space.
  • Do not obstruct the emission of the aerool manually or by other means when the device is in operation.
  • Do not tamper with the device during operation.
  • Turn off the power supply in extreme weather conditions
  • Install the device in ventilated and relatively open spaces for optimal sanitation.
figure 2 Airlog Tutorial 6

(2) Installation

The device should be installed in ventilated and relatively open areas for optimal coverage. Keep the device in an area that allows easy filling of the same.
Place the device on a stable surface, where there is no risk of falling or being bumped during its operation.
Alternatively, it is possible to fix the speaker to the wall by placing the strip at an appropriate height with the screws and then fasten the screws and thus placing it on the wall through the appropriate hole on the back.

fig 3 turorial sistema sanitizzante

(3)Activation

  1. To open the compartment, use the safety key supplied. (a)
  2. Unscrew the bottle and fill with Airlog 6 without going beyond the level
    maximum. To avoid possible problems with the functioning of the system, do not introduce other substances; in order to avoid alteration of the self-cleaning system (b)
  3. Screw and close the compartment with the same key. (c)
  4. Connect the appliance to the power cable. (d)
Airlog diffuser tutorial 6 keys lights

(4) Button functions and lights

Let's proceed with our Airlog diffuser tutorial 6 with the illustration of the buttons used to set the device. These, as we can see from the figure 1, are placed under the display and have the following functions:

  • [BACK] come back
  • [ENTER] confirm
  • [UP ARROW] increase the numeric value
  • [RIGHT ARROW] go on to select on the display

There are 2 indicator lights:

  1. To the left [ALERT] if it lights up yellow check for the presence of Airlog liquid 6 inside the bottle
  2. To the right [OPERATION] it can light up with two different colors:
    green colour while the machine is operating (that is, during a time period actively set for treatment)
    blue color while the machine is in programmed standby (or in the waiting pause between one scheduled time and another)
tutorial date and time

(5) Speaker date and time settings

  1. Press the button [UP ARROW] and the button [RIGHT ARROW] simultaneously to access the local date and time setting interface.
  2. Select the field to be adjusted from Year, Month, Current day and time, via the button [RIGHT ARROW]
  3. Change the numerical values ​​using the key [UP ARROW]
  4. Save the modified parameters by pressing the key [ENTER] at the end of the operation

(6) Factory reset

Press the button [BACK] and the button [RIGHT ARROW] at the same time to restore the factory settings until you see the display with all characters written in full. Then you can release the buttons.

airlog day adjustment 6

(7) Programming day and time of operation of the diffuser

  1. To access the weekly programming interface click on the button [RIGHT ARROW]
  2. Continue to press the key [RIGHT ARROW] to scroll through the various days of the week until the desired one is selected, then press [ENTER] to select the day to program
  3. They can be set up to 3 time slots per day on which to activate the speaker, selecting whether to change the 1 the 2 o la 3.
    We can therefore set within the same day:
    – a single time slot (e.g.: 1/ 09:00-18:00)
    – two time slots (e.g. 1/ 09:00-12:00 2/ 15:00-18:00)
    – three time slots (e.g. 1/ 09:00-11:00 2/ 13:00-15:00 3/ 17:00-20:00).
    To select the band or time to be changed, scroll using the key [RIGHT ARROW].
    To change the numerical value to be adjusted, press the key [UP ARROW] until the desired figure is reached

N.B. To deactivate a day (e.g.: do not deliver on Sunday), go to the desired day and set the time 1/ with values 00:00 – 00:00 and press enter to save the setting

dispensing pause duration

(8) Change product diffusion frequency

Continuing with the key [RIGHT ARROW] from the day and time programming menu, for each time slot, you go to the dispensing frequency adjustment screen. Two parameters are set here:

pause time and delivery time, both expressed in seconds, for an adjustable value up to a maximum value of 300. The parameter to be modified is always selected using the key [RIGHT ARROW] and the value is changed using the key [UP ARROW].

By pressing the key [ENTER] the day band and frequency settings are saved !!!

(9) Standby mode

Press and hold the button [ENTER] to initiate the standby mode of the device.
Press and hold the button again [ENTER] to wake up the device.

(10) Cleaning and storage

  1. Turn off and interrupt the power supply, then roll up the power cord carefully.
  2. The system with the exclusive use of Airlog 6 it is self-cleaning
  3. In case of non-use for prolonged periods, empty the contents of the bottle / tank, to prevent residual substances from crystallizing.
  4. Protect the device from dust and store it in a cool and ventilated place.

(11) Optimal delivery Air Log 6

Considering a closed environment, with ambient temperature between i 18 and 25 degrees, an environmental assessment was made on the dispensing of the airlog sanitizer through the diffuser 6, and the indication emerged that the optimal programming is as follows:

  • set the speaker with a pause of 300 seconds (5minutes)
  • set the dispensing of the sanitizer for the duration of 180 seconds (3 minutes)

(12) Sanitation capacity in relation to the cubature

The delivery of the Airlog sanitizer 6, set in 180 seconds for 8 hourly media deliveries, satisfies a cubage of 480 m3. This delivery time, also took into consideration a safety margin on the delivery time of the 15% more .

We describe below some installation examples:

  1. Surface of 500 sqm per 3 meters high needs 3 speakers placed in the entrance and exit passageways and in any rooms where more than six people can be stationed at the same time (e.g.: meetings, training events, other activities involving da 5 people up).
  2. Surface of 120 sqm per 4 meters high (commercial use) necessity of 1 diffuser.
  3. Environment of 300 sqm per 2,7 meters high needs 2 speakers (in this case we have a safety margin on the delivery time of the 25%)

These examples are indicative for the settings described above ie 3 minutes of delivery e 5 minutes break, or 8 disbursements each 64 minutes

▓ [Learn more about the device] ▓
▓ [Air Log system presentation video 6] ▓

Finally for any questions to which the speaker tutorial Air Log 6 did not answer you can contact our company by clicking here

WATER WASTE ST
Ethical code
company policy
products
services
scientific Committee
events
contatti